SKU: SP012422
184.80 (Inc VAT)
Auto-darkening welding filter with a clear vision and large view. LiFE+ Color ADF technology provides greater clarity of vision, and remote control buttons make adjustment simple without taking the helmet off. Shade range: 5, 8, 9-13.
SAFETY:
• When fitted to a suitable face shield that meets the necessary and local safety standards, this ADF is suitable for welding, grinding, cutting, spraying and arc gouging. It is not suitable for laser welding.
• This ADF is suitable only for oxygen cutting in the oxygen flow rate range 900-2000 l/h. In the cutting mode, shade 5 is used. In the cutting mode the filter does not change from light to dark, but remains constantly dark.
• The ADF does not protect against explosive devices or corrosive liquids.
• Always use the protective lens on the ADF. Replace the protective lens when it becomes dirty/discolored/worn/ cracked/scratched/pitted.
• Avoid heavy knocks on the ADF as it may break.
• If the ADF does not darken when the arc ignites, stop welding immediately. Inspect the ADF, check the batteries and change if necessary. If this does not help, contact a Kemppi representative or your supervisor.
• The ADF is not water-proof or water resistant. Do not immerse it in water. Protect the filter from contact with liquids and dirt.
• The recommended operating temperature range is -5°C…+55°C (23°F…131°F). Do not use the ADF beyond this temperature range.
• Never place the ADF on a hot surface.
• Never open or tamper with the ADF.
• Do not make any modifications to the ADF, unless specified in this manual.
• Do not use other replacement parts than those specified in this manual. Unauthorized modifications and replacement parts void the warranty and may expose the wearer to unnecessary risk of personal injury.
• clean the surface regularly. Do not use strong cleaning solutions or solvents. Always keep the sensors and solar cells clean. See Maintenance.
• Materials which may come into contact with the wearer’s skin can cause allergic reactions.
•Failure to follow these safety instructions and/or failure to follow the operating instructions may cause voiding of the warranty and cause a risk of personal injury.
TroubleShooting:
| PROBLEM | PROBABLE CAUSE AND RECOMMENDED ACTIONS |
| The ADF does not darken or flickers |
|
| Slow Response |
|
| Poor Vision |
|
MAINTENANCE
Clean the ADF regularly (for example, when you change the protective lens). You can either wipe the surface with a clean, dry piece of cloth, clean it with a piece of smooth cloth moistened with pure alcohol, or clean it with commercial disinfectant. If used properly, the ADF requires no further maintenance during its lifetime.
The period of use depends on various factors such as use, clean- ing, storage and maintenance.
Storage
Operating temperature: -5°C…+55°C (23°F…131°F). Storage temperature: -20°C…+50°C (-4°F...122°F). Store the ADF in a dry, cool and dark environment. If the ADF in not to be used for a prolonged period of time, remove the battery.
Disposal of the product
Do not dispose of the product with household waste. Follow the local laws and regulations on safe and ecological disposal of electronic devices.
