SKU: X3P450G
3676.80 (Inc VAT)
The power source for manual, synergic, and pulse MIG/MAG, MMA, and gouging processes provides 450 A at 60% duty cycle. X3P Power Source includes 71 factory-installed welding programs for Fe, Ss, AlSi5, AlMg5, Fe Metal, Fe Rutil, FC-CrNiMo, and Fe Metal filler wires.
- Mains connection voltage 380...415 V ±10 %
- Mains connection phases 3~50/60 Hz
- Mains connection cable type H07RN-F
- Mains connection cable size 4 mm²
- Maximum supply current [I1max] 33 ... 30 A
- Effective supply current [I1eff] 25 ... 23 A
- Rated maximum input power [S1max] 21 kVA
- Mains fuse 25 A
- Idle state power consumption [P1idle] 15 W
- No-load voltage [U0] 61 ... 67 V
- Open circuit voltage [Uav] 60 ... 65 V
- Output at +40 °C, 60% MIG 450 A
- Output at +40 °C, 100% MIG 380 A
- Output at +40 °C, 60% MMA 430 A
- Output at +40 °C, 100% MMA 360 A
- Output range, MIG 15 A / 12 V ... 450 A / 45 V
- Output range, MMA 15 A / 15 V ... 430 A / 46 V
- Voltage adjustment range, MIG 8 ... 50 V
- VRD voltage 24 V
- Power factor at rated maximum current [λ] 0.88
- Efficiency at rated maximum current [η] 87 %
- EMC class A
- Minimum short-circuit power of supply network [Ssc] 6 MVA
- Voltage supply for auxiliary devices 48 V
- Wired communication type CAN bus
- Operating temperature -20 ... 40 °C
- Storage temperature -40 ... 60 °C
- Recommended minimum generator power [Sgen] 25 kVA
- Degree of protection (fully installed) IP23
- External dimensions, length 698 mm
- External dimensions, width 251 mm
- External dimensions, height 361 mm
- Weight without accessories 35 kg
- Standards IEC 60974-1, -10