SKU: X5220300000
1846.80 (Inc VAT)
X5 WIRE FEEDER 300 MANUAL
X5220300000
Top-loading wire feeder with a digital parameter display. For MIG/MAG, MMA, and gouging. Manual, 2-knob parameter control. 4-wheel wire feed mechanism with integrated lighting and a kinetic spool brake. USB port connectivity.
- Supply voltage 48 V
- Supply current at maximum load 6.3 A
- Idle power 6 W
- Idle power with cabinet heater 30 W
- Welding current 60% 500 A
- Welding current 100% 430 A
- EMC class A
- Welding connection type Euro
- Wire feed mechanism 4-roll, Single-motor
- Diameter of feed rolls 32 mm
- Maximum wire spool weight 20 kg
- Maximum wire spool diameter 300 mm
- Maximum shielding gas pressure 0.5 MPa
- Control panel, model X5 Feeder Panel 300R
- Control panel, display B/W OLED
- Control panel, controls 2 control knobs, Push buttons
- Control panel, type of installation Built-in
- Control panel, input voltage (DC) 12 V
- Control panel, input current (DC) 100 mA
- Wired communication type CAN bus
- Degree of protection (fully installed) IP23S
- External dimensions, length 650 mm
- External dimensions, width 230 mm
- External dimensions, height 410 mm
- Weight without accessories 10.9 kg
- Standards IEC 60974-5, 10